It is very difficult to answer this question, because no one wants to take a clear position on the subject. However, several studies suggest that aluminum may be a contributing factor to Alzheimer’s disease. Knowing that an aluminum anode dissolves over time, it is normal to conclude that aluminum particles will end up in your…

Read More

A powered anode is a non-sacrificial anodes that use a current rectifier, plugged into an electrical outlet, which sends current in the hot water tank through a titanium anode. Unlike sacrificial anodes, powered anodes are maintenance free and designed to last for years. Plus, they are well known to solve rotten egg odor problems in…

Read More

Anode rod in water heater can be very hard to remove. It often happens that the magnesium anode is installed very tight at the factory and is very difficult to remove. It also happens, in older water heaters, that lime builds up and holds the anode in place. The best way to remove an anode…

Read More

In most cases, water heater anode rods are universal. The only exceptions are : Buderus : They use another type of threading to install the magnesium anode. Bradford White : Some model have the anode is built into the hot water outlet. All other water heater brands use a regular magnesium anode with 3/4 ”…

Read More

Adjusting the temperature of your water heater is very easy, but make sure you are aware of the risks associated with too low or too high temperature. If you want to know how to turn up water heater, you just have to follow the 6 steps in the following guide : How to Change Your…

Read More

No hot water in house but have cold water ? You certainly have a problem with your water heater. Several things can cause your hot water tank to fail. We’ve put together a list of the most common issues: 9 Reasons Why Your Hot Water Tank Isn’t Working.

Read More

The answer is no and that is why Corro-Protec offers different models adapted to tank sizes. If your water heater has two anodes, you can replace one of them with our Corro-Protec imposed current anode and leave the other one in place. Even if you install the Corro-Protec anode to eliminate the rotten egg smell…

Read More

Yes, it is even highly recommended to install an imposed current anode if you have a water softener. The water softener generally makes the water more aggressive to the tanks, which reduces the life of your hot water tank and creates a more conducive environment for the development of Sulfur Reducing Bacteria that creates the…

Read More

If your hot water smells like oil, it is possible that the water supply or plumbing has been contaminated with gasoline, oil or bacteria. This can be a health risk. In rarer cases, you may notice an oil smell in a new water heater caused by a chemical reaction between the water and the tank components. This…

Read More

A rotten egg smell in your hot water can be caused by various factors. If you can only smell this smell on your kitchen faucet, it could be due to the fact that the drain is partially blocked by decomposing remains. The odour can also come from your water purifier if it is not regularly…

Read More

If your water smell like sewage, your plumbing and supply may contain iron, algae, bacteria or decomposing organic matter. This problem may be due to the season of the year and may pose a health risk. During periods of limited use, water can become stagnant and develop these odour through stagnation and the presence of…

Read More

Each water heater is manufactured with a magnesium anode to temporarily limit rust. In most cases, the sulphur odour is caused by water with a high magnesium content that comes into contact with the original anode already present in the water heater. In addition, this smell can be created by a bacterium (sulfur bacteria). The…

Read More

You can remove the bad smell in your hot water by removing the reacting magnesium anode rod that comes in contact with the magnesium in the water. However, this deprives your water heater of its only protection against rust. You can choose an aluminum anode rod that requires more maintenance or the titanium Corro-Protec impressed…

Read More

If your hot water smells like onions, it can be caused by different factors. Here is a list of the main factors: A prolonged absence can dry out the pipes and lead to onion and sewer odour A clogged drain Incorrect temperature setting of the water heater that causes bacteria to grow The metal in the…

Read More

The size of your anode depends on your anode type and the capacity of your water heater. In the case of a sacrificial anode, its rod is much larger than an impressed current anode, because the more material there is, the longer it offers a protection time.For the Corro- Protec impressed current anode, its protection…

Read More

When the anode rod in your water heater no longer works due to wear and tear, it is important to replace your sacrificial anode with a new one. Indeed, this type of magnesium or aluminium anode protects the walls against rust by dissolving its alloy. Another solution is to purchase a Corro-Protec impressed current anode…

Read More

It is important to change the sacrificial anode in your RV every year for a steel water heater. Aluminium tanks are generally not equipped with replaceable anodes because they have an inner coating of zinc and aluminium with the same protective function.

Read More

It is important to inspect the sacrificial anode every 1 to 3 years and replace it after more than 50% of its wear and tear to prevent corrosion of your tank. Its lifespan depends on the quality of your water. On average, the magnesium or aluminum anode must be changed every 3-5 years. For a…

Read More

To treat bad odours, it is recommended to use the Corro-Protec anode rod. This impressed current anode eliminates the bacteria responsible for the sulphur odour in less than 24 hours. In addition, the Corro-Protec doubles the life of your water heater, unlike a sacrificial anode.

Read More