Which Tools do I Need to Install the Corro-Protec Anode?
Our response
To successfully remove your old anode and install your Corro-Protec, certain tools are required. A ratchet wrench fitted with a 1 1/16” (27 mm) socket will be necessary for the removal process. Meanwhile, a socket of 1 3/16” (31 mm) size or an adaptable wrench is recommended for the installation of the Corro-Protec. In addition, a square-headed screwdriver and universal pliers should also be at hand for the operation.
If you have an impact wrench, this could help you remove a stuck sacrificial anode rod.
Blog
Propane Tankless Water Heaters: The Complete Guide
Propane tankless water heaters offer a superior solution for heating water efficiently in homes, RVs, and off-grid living. They put you in control, whether you’re […]
Best Type of Anode Rod for Residential Water Heaters
Best Type of Anode Rod for Residential Water Heaters Anode rods are essential for maintaining your water heater and preventing tank corrosion. However, did you […]
Powered Anode Rod
Corro-Protec’s anode rod for water heaters fits any residential tank on the market. Get the most durable and versatile anode available.
What is an Anode Rod?
You might have heard about an anode rod if you have a hot water heater. But what exactly is it, and why is it important? […]
Powered Anode Rod for RV Water Heaters
Our RV powered anode rod fits all Suburban RV water heaters. Enjoy the power of our permanent corrosion protection and more.