CORRO-PROTEC POWERED ANODE ROD

STOPS SMELL, CORROSION, AND LIMESCALE BUILD UP IN WATER HEATER

Screen Shot 2020-09-21 at 2.26.10 PM

Water Heater Corrosion

magnesium anode vs powered anode

How Magnesium Anode Rod Works

The magnesium anode rod will sacrifice itself to protect the water heater. Since corrosion always attacks weaker metals first, the magnesium anode will corrode until it is about 50% consumed. After that, if you don't change the magnesium anode, the water heater will start to rust and will last couple years.

How Corro-Protec Works

The Corro-Protec powered anode includes a titanium anode and a current rectifier. When the rectifier is connected to the nearest outlet, the rod in the tank supply a small amount of current into the water heater. This current completely stops the loss of energy from all metals to which the ground is connected. The corrosion processus is then completely stopped. Since the anode is made out of titanium, it does not disintegrate over time. 

Rotten Egg Smell in Hot Water

What Causes Rotten Egg Smell 

Rotten egg smell in hot water can be cause by two things :

  1. The Sulfate-reducing bacteria
  2. Chemical reaction with the magnesium rod

How Corro-Protec Stops Smells

By supplying just enough current in the water heater, the Corro-Protec system instantly kill the sulfate-reducing bacteria that create the rotten egg smell in the hot water

In addition, the protection provided by the Corro-Protec stops the chemical reaction between the magnesium anode rod and the hot water. It means that even if you have two or three anodes in the tank and the smell is coming from the magnesium rod, you can change only one anode with the Corro-Protec and the smell will disappear.

Sulfur smell in hot water

Reduces Limescale Build-Up

Where Does Limescale Come From

The magnesium anode rod will sacrifice itself to protect the water heater. Since corrosion always attacks weaker metals first, the magnesium anode will corrode until it is about 50% consumed. After that, if you don't change the magnesium anode, the water heater will start to rust and will last couple years.

How Corro-Protec Works

The Corro-Protec powered anode includes a titanium anode and a current rectifier. When the rectifier is connected to the nearest outlet, the rod in the tank supply a small amount of current into the water heater. This current completely stops the loss of energy from all metals to which the ground is connected. The corrosion processus is then completely stopped. Since the anode is made out of titanium, it does not disintegrate over time. 

Rating: 4.7 - 3009 Reviews

4.7-Star-Rating

Rating: 4.7 - 47 Reviews

4.7-Star-Rating

Rating: 4.9 - 124 Reviews

4.7-Star-Rating

Rating: 4.9 - 37 Reviews

BECOME A CORRO-PROTEC RETAILER

Corro-Protec is looking for plumbers and water treatment companies who have the desire to succeed and offer exceptional customer service.