Powered Anode Rod 4.88/5

Our powered anode uses very little electricity. Internal testing confirms that the operating cost remains extremely low throughout the year. Since the amount of current used can vary slightly depending on the water quality in your region, the exact consumption may differ from one household to another.

Average yearly cost:

• Canada: about $2 CAD per year
• United States: about $3 USD per year

This is for 24/7 operation, all year round = less than the cost of running a small lightbulb.

The Corro-Protec powered anode rod is only 12 inches tall, so in most cases you’ll only need about a foot of vertical clearance to install it on your water heater. This makes it easy to fit in basements, closets, or tight utility spaces.

If you need to remove your old sacrificial anode rod, keep in mind it’s usually much longer and may require extra space. If clearance is limited, the rod can be cut into sections during removal without affecting your installation.

Once the old rod is out, installing the Corro-Protec is quick and easy, even in confined areas.

All our Corro-Protec models include a certified 12-foot power supply cord, ensuring safe operation, easy installation, and flexible placement.

Note that our Corro-Protec for RV (12 Volts version) includes a 3-foot cord.

Absolutely, it is even highly recommended to install an imposed current anode if you have a water softener. You can use Corro-Protec powered anode rod with any water treatment system safely. No matter what type of water softener system you’re using, the Corro-Protec rod will adjust itself automatically to work effectively with your water.

The water softener generally makes the water more aggressive to the tanks, which reduces the life of your hot water tank and creates a more conducive environment for the development of Sulfur Reducing Bacteria that creates the rotten egg smell in hot water. The Corro-Protec Powered anode rod will automatically adjust to provide optimum rust protection.

No, the Corro-Protec powered anode rod does not void your water heater warranty. In fact, manufacturers consider powered anode rods to be maintenance parts that support the proper functioning and longevity of the tank.

In the United States, this is protected under the Magnuson-Moss Warranty Act, and in Canada, under the Canadian Competition Act. The only exception permitted by law is if a manufacturer offers an equivalent part using the same technology at no cost, which never happens.

Yes. Corro-Protec meets recognized North American standards for safety and water quality.

• Water Quality Certification: Tested and certified by the Water Quality Association against NSF/ANSI/CAN 372, confirming the product is lead-free and safe for potable water systems.
• Power Supply Safety Certification: Conforms to UL Std. 1310, certified to CSA Std. C22.2 No. 223, ETL Intertek 5003982, ensuring the power supply meets strict electrical safety standards.

The system is engineered to operate safely and efficiently, using less than $3 of electricity per year.